Product Code:SAE AMS4123
Title:Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope: This specification covers an aluminum alloy in the form of bars and rods.These products have been used typically for machined parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
Rationale: This specification covers an aluminum alloy in the form of bars and rods.These products have been used typically for machined parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.【英文标准名称】:RFconnectors,connectorcableassembliesandcables-Intermodulationlevelmeasurement.
【原文标准名称】:射频连接器、连接器电缆组件和电缆.互调程度测量
【标准号】:NFC93-557-2001
【标准状态】:现行
【国别】:法国
【发布日期】:2001-11-01
【实施或试行日期】:2001-11-20
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:K13
【国际标准分类号】:33_120_30
【页数】:12P;A4
【正文语种】:其他